U-DRC200
Parameter
U arm up and down stroke:1200mm±20mm
The lowest position of U arm to ground: 480mm±20mm
U arm rotation:-30°~120°
Detector rotation：-45°~+45°
SID stroke：1000mm~1800mm
Function
★U-DRC200 have two functions about resetting and rotate protection.
★Resetting
You can preset three positions into the machine. And press the three resetting key the system will move to the positions you preset.
Usually we set 1m position, 1.8m position and under table position.
★Rotate protection
When the U arm is at a lower position you press the key to rotate it. It will not rotate. You should run up it to a higher position then it will work. This function is to protect the U-DRC200 from topple and fall because of the U arm touch the ground when it rotates.
